B-1 T/S Head Q & A

Question:	Will these heads fit on my 440 block?
Answer:	We have versions to fit a hemi block, modified mega block, or modified K B Block and our Pheonix block.
Question:	What valve size do the heads have?
Answer:	The hemi, modified mega block, or the K B block with a 4.500 bore will normally accept a 2.375 intake valve and 1.800 exhaust valve. The Pheonix block which is at 4.600 bore will us a 2.450 intake valve and 1.880 exhaust valve.
Question:	That type of roller tappets can you use?
Answer:	Tappets must be an oiler type tappet that will feed oil up the pushrods. Tappets are available from Crane or Comp Cams.
Question:	What type of valves are used with this head?
Answer:	Must use a titanium valve with a steel tip insert.
Question:	What rockers do I use with this head?
Answer:	Rocker assemblies are available from T&D and Jesel
Question:	What intake manifolds can I use?
Answer:	For most uses sheet metal custom intakes are available and special order cast single 4 bbl available.
Question:	Can I use my standard pistons?
Answer:	No, custom pistons are required.
Question:	Can I use my stock headers?
Answer:	No, exhaust bolt pattern is special to head. Header flanges are available.
Question:	Can I use my stock valve covers?
Answer:	No, special valve covers available for heads.
Question:	Can I use my stock or MSD dist with these heads?
Answer:	To use stock dist head must be modified to provide dist clearance. We recommend Newman Racing Prod offset dist to clear head.